Selection Knowledge

Key Takeaways
- Anchor points precede dimensions: Determine fixed anchor points and spans first, then calculate the shade sail size accordingly to ensure proper tensioning upon installation.
- Ensure a drainage slope: maintain sufficient inclination to prevent water pooling in the center after rain, which could strain the net.
- Hardware load matching: Expansion bolts, wire ropes, and turnbuckles must be sized to match the sail area.
- Ensure even tension on the perimeter rope: tighten diagonally opposite corners alternately during tensioning to prevent deformation caused by uneven stress on a single corner.
- Design considerations: retract in high winds or heavy snow; ensure easy installation and removal.
- Regularly inspect anchor points: Check bolts and corner rings quarterly; tighten immediately if loose.